23
7.15. Remove the G-Board
1. Remove the Front bracket. (See section 7.14.)
2. Remove the screws (×2 ).
3. Remove the Front shield case front.
4. Disconnect the connectors (G51).
5. Remove the screws (×3 ).
6. Remove the G-Board.
7.16. Remove the speaker L, R
1. Disconnect the connector (A12). (See section 7.4.)
2. Remove the screws (×4 each) and remove the
speaker L, R.
7.17. Remove the S-Board
1. Remove the stand brackets. (See section 7.10.)
2. Remove the screws (×2 ).
3. Disconnect the connector (S1).
4. Remove the screws (×2 ) and remove the S-Board.
7.18. Remove the K-Board
1. Remove the S-Board. (See section 7.16.)
2. Unlock the cable clampers to free the cable.
3. Remove the screws (×2 ).
4. Disconnect the connectors (K1) and remove the K-Board.
To Next Page
Loading...
