Panasonic TH-42PW3

29
Setup for input signals
Colour system / Panasonic Auto
Select the Signal from the “Setup” menu during AV (S-Video) input signal
mode. (“Signal [AV]” menu is displayed.)
Press to select the “Colour system” or “Panasonic
Auto”.
Select
Setup
Si
g
nal
Component/RGB-in select
RGB
OSD Lan
g
ua
g
e
En
g
lish
(
UK
)
Return
Mode
Colour system
Pansonic Auto
(4:3)
Press to select each Functions.
Function
Set the colour system to match the input signal. If set to “Auto”, the
colour system is determined automatically.
Set to “4:3” to view 4:3 images in an unchanged format when
Panasonic Auto is selected. If you would like to view 4:3 images in
“Just” format, set to “Just”.
Auto PAL SECAM M NTSC NTSC
Change
Select
3D Y/C Filter
(
NTSC
)
Colour s
y
stem
Panasonic Auto
(
4:3
)
On
Auto
4:3
SIGNAL
[
AV
]
Return
Press (store) button