Panasonic TH-50PD12U - Removal of Plasma Display Panel

25
TH-50PD12U
9.16.3. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V2-Board.
(Refer to Removal of V1-Board and V2-Board)
3. Remove the LED Panel and Remote Sensor Panel.
4. Remove the Cabinet Assy.
9.17. Removal of Plasma Display
Panel
The C1,C2,C3 Boards are connected with the plasma dis-
play panel for the repair.
1. Remove 6 screws and then remove the 2 Fan Blocks.
2. Disconnect the Fan Relay Connectors.
3. Remove 8 screws and then remove the Stand Block (L,
R).
4. Disconnect the connectors (A2, A5, A6, A15, A22, A24).
5. Remove 5 screws and then remove the A/Z-Board Block.
6. Disconnect the connectors (P9, P34).
7. Remove 3 screws and then remove the AC-Inlet Block.
8. Remove 2 screws and then remove the S1-Board Block.
9. Disconnect the connector (D25).
10. Remove the flexible cables from the connectors (C11,
C21, SC20).
11. Remove 4 screws and then remove D-Board.