Panasonic TH-50PD12U - 4 Specifications

8
TH-50PD12U
4 Specifications
Power Source 110 - 127 V AC, 50/60Hz
Power Consumption
Power on 365 W
Stand-by condition Save OFF 0.9 W, Save ON 0.4 W
Power off condition 0.2 W
Plasma Display panel Drive method: AC type 50-inch,
16:9 aspect ratio
Screen size 43.5" (1,106 mm) (W) × 24.4" (622 mm) (H) × 49.9" (1,269 mm) (diagonal)
(No. of pixels) 1,049,088 (1,366 (W) × 768 (H) [4,098 × 768 dots]
Operating condition
Temperature 32 °F - 104 °F (0 °C - 40 ° C)
Humidity 20 % - 80 %
Applicable signals
Color System NTSC, PAL, PAL60, SECAM, Modified NTSC
Scanning format
525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) /
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i
PC signals VGA, SVGA, XGA
SXGA, UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
VIDEO BNC 1.0 Vp-p (75-ohm)
S VIDEO MINI DIN 4PIN Y: 1.0 Vp-p (75-ohm), C: 0.286 Vp-p (75-ohm)
COMPONENT / RGB Y / G (BNC) with sync 1.0 Vp-p (75-ohm)
P
B
/B (BNC), P
R
/R (BNC) 0.7 Vp-p (75-ohm)
PC (HIGH-DENSITY MINI D-SUB 15PIN) Y or G with sync 1.0 Vp-p (75-ohm)
Y or G without sync 0.7 Vp-p (75-ohm)
B / P
B
/ C
B
: 0.7 Vp-p (75-ohm)
R / P
R
/ C
R
: 0.7 Vp-p (75-ohm)
HD / VD: 1.0 - 5.0 Vp-p (high impedance)
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLE
AUDIO1-3 RCA PIN JACK × 6 0.5 Vrms
AUDIO4 M3 JACK 0.5 Vrms
EXT SP 6-ohm, 16 W [8 W + 8 W] (10 % THD)
Accessories Supplied
Remote Control Transmitter N2QAYB000432
Batteries AA Size × 2
Fixing band TMME203 × 1
Dimensions (W × H × D) 47.7" (1,210 mm) × 28.5" (724 mm) × 3.8" (95 mm)
Mass (weight)
main unit only approx. 70.6 lbs
with speakers approx. 79.4 lbs
Note:
• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.