Panasonic TH-50PF50E - Removal of P-Board; Removal of AC Inlet Assy; Removal of SU-Board and SD-Board

22
TH-50PF50E
9. Remove 3 screws and then remove the Fan Block (B).
10. Turn over the Fan Block (B).
11. Remove 4 screws and then remove the fan (D) from the
Fan Fixed Metal.
12. Remove 3 Rubbers.
8.7. Removal of P-Board
1. Disconnect the connectors (P2, P9, P11, P16, P25, P34,
P35).
2. Remove 7 screws and then remove P-Board.
8.8. Removal of AC Inlet Assy
1. Disconnect the connector (P9).
2. Remove 2 screws ( ) and then remove the AC Cord
Clamper A.
3. Remove 1 screw ( ) and then remove the AC Inlet Assy.
8.9. Removal of SU-Board and SD-
Board
1. Remove the Duct Barrier (A) Assy, Duct Barrier (B) Assy.
(Refer to Removal of Fan)
2. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5).
3. Disconnect the connectors (SU41, SD42, SD46).
4. Remove 3 screws ( ).