Panasonic TH-50PF50E - Page 28

28
TH-50PF50E
18. Remove 4 screws ( ) and then remove SU-Board and
SD-Board.
Note: when fixing SU-Board and SD-Board
• Screw on 2 screws (1) firstly.
19. Remove 7 screws and then remove SC-Board.
20. Disconnect the connector (C35).
21. Remove the flexible cables from the connectors (C10,
C20, C21, C26, C36).
22. Remove 2 screws and then remove the S1-Board Block.
23. Remove the Duct Barrier (C).
24. Remove 7 screws and then remove the Handle Fixing
Metal (L, R).
Note: when fixing Handle Fixing Metal (L, R)
• Screw on 2 screws (1) firstly.
25. Pull the bottom of the Plasma Display Panel forward
(arrow1).
26. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
27. Remove 12 screws and then remove the 2 Hanger Metals
and the Stand Pole Bracket Assy (L, R) and the Hanger
Fixing Metal Assy (L, R).
28. Remove 6 screws ( ) and then remove the Attachment
Metals (TL, TR, BL, BR).
29. Exchange the Plasma Display Panel.