11
Connections
Cable Securing
There are three clampers supplied to secure cables at three
positions.
1. Attach the clamper.
1
Attach the clamper
To remove from the unit:
Keep
pushing both
side snaps
hole
snaps
Insert the clamper
in a hole.
2. Bundle the cables.
2
Bundle the cables
hooks
Set the
tip in the
hooks
To loosen:
Keep
pushing
the knob
knob
AC Cord Connection
1. Plug the AC cord into this Display.
2.
sure he AC cord is locked on both the left and right sides.
3. To unplug the AC cord, press the two knobs and pull.
NOTE:
When disconnecting the AC cord, be absolutely sure to