Panasonic TH-55LFV5W - OSD Menu Setup for Network Connection; Serial Control Configuration; LAN Setting Configuration

20
OSD Menu Setup for Network Connection
To proceed the network setting, you will have to enter the OSD menu.
SERIAL CONTROL:
Select {LAN} as the nectwork control port.
1. Press [MENU] button on this Display’s control.
2. Press [
] or [ ] button to select the {ADVANCED
OPTION} menu.
3. Press [INPUT] button to enter the submenu.
4. In the submenu, press [
] or [ ] button to select the
{SERIAL CONTROL} menu, press [
] or [ ] button to
select {LAN}.
1
2
3
SET EXIT MENU
:SEL :NEXT
INPUT CHANGE
TERMINAL SETTING
COLOR SYSTEM
SCAN MODE
SERIAL CONTROL
LAN SETTING
ADVANCED OPTION RESET
FACTORY RESET
:RETURN :EXIT MENU
NORMAL
AUTO
INITIAL INPUT
OFF
OVERSCAN
LAN
ADVANCED OPTION
5. Press [MENU] button to return to the previous menu, or
press [MENU] button several times to exit the OSD menu.
LAN SETTING:
Assign {IP ADDRESS}, {SUBNET MASK}, and {DEFAULT
GATEWAY} for this Display.
NOTE:
 The {LAN SETTING} is available only after setting the
{SERIAL CONTROL} to {LAN}.
1. Press [MENU] button on this Display’s control.
2. Press [
] or [ ] button to select the {LAN SETTING}
menu.
3. Press [INPUT] button to enter the submenu.
1
2
3
SET EXIT MENU
:SEL :NEXT
INPUT CHANGE
TERMINAL SETTING
COLOR SYSTEM
SCAN MODE
SERIAL CONTROL
LAN SETTING
ADVANCED OPTION RESET
FACTORY RESET
:RETURN :EXIT MENU
NORMAL
AUTO
INITIAL INPUT
OFF
OVERSCAN
LAN
ADVANCED OPTION
4. In the submenu, press [ ] or [ ] button to select the
{DHCP CLIENT} menu, press [
] or [ ] button to select
{ON}.
1
2
3
EXIT MENU
:SEL
DHCP CLIENT
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
:RETURN :EXIT MENU
ON
+-:ADJ
ADVANCED OPTION
LAN SETTING
5. Press [MENU] button to return to the previous menu, or
press [MENU] button several times to exit the OSD menu.
DHCP CLIENT
To obtain an IP address automatically using a DHCP server,
set this to {ON}. If DHCP server is not used, set this to {OFF}.
IP ADDRESS
Enter an IP address if DHCP server is not used.
SUBNET MASK
Enter a subnet mask if DHCP server is not used.
DEFAULT GATEWAY
Enter a gateway address if DHCP server is not used.
NOTES:
 To use a DHCP server, make sure the DHCP server is
started.
 Contact your network administrator for details on settings.