21
Using Web Browser Control
You can use a Web browser to control this Display and set up a network and password.
NOTE:
The “Web Browser Control” is currently supported with Windows IE6, IE7, or IE8.
Before Using Web Browser Control
To use the Web browser control, the Display and computer setups are required.
Dsiplay Setup
Set each {LAN SETTING} setting and make sure to set the {SERIAL CONTROL} to {LAN} (see page 20, 29).
1. Display [Internet Properties] window.
Click [Start]
Æ
[Control Panel]
Æ
[Network and Internet Connections]
Æ
[Internet Options].
2. Click the [Connections] tab and then [LAN Settings].
3. Deselect the [] and [] boxes.
4. Click [OK].
Enable JavaScript
1. Display [Internet Properties] window.
Click [Start]
Æ
[Control Panel]
Æ
[Network and Internet Connections]
Æ
[Internet Options].
2. Set the security level on the [Security] tab to [Default Level]. Alternatively enable [Active scripting] from the [Custom
Level] button.