- 183 -
Overcurrent error message appears
●
The connected USB device may cause this error. Remove the device and
turn the TV off with Mains Power On / Off switch, then turn it on again.
●
Check foreign objects are not inside the USB port.
An error message appears
●
Follow the message’s instructions.
●
If the problem persists, contact your local Panasonic dealer or the
authorised service centre.
The display panel moves slightly and clattered sound is heard when it is
pushed with a finger
●
There is a little gap around the panel to prevent damage to the panel. This
is not a malfunction.
To Next Page