Panasonic TH-65PF11UK - Page 30

30
TH-65PF11UK
7. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
8. Remove 4 screws and then remove the Slot Block.
9. Remove 8 screws ( ) and then remove the Shield Plates
(A, B).
10. Remove 7 screws ( ) and then remove the Cable Hold-
ers (A, B).
11. Disconnect the connector (D25).
12. Remove the flexible cables from the connectors (C11,
C21, C22, C52, C53, C61, SC20).
13. Remove 4 screws and then remove D-Board.
14. Disconnect the connectors (P2, P9, P11, P12).
15. Remove 8 screws and then remove P(MULTI)Board,
P(SUS)Board and Fixed Plate.
16. Remove 4 screws and then remove the Speaker Terminal
Blocks (L), (R).
17. Disconnect the connector (SS34).
18. Remove 2 screws and then remove the S1-Board Block.