Panasonic TH-65PF11UK - Removal of SS2-Board and SS3-Board; Removal of S1-Board; Removal of Front Glass, V1, V2-Board and Cabinet Assy

26
TH-65PF11UK
5. Remove 6 screws and then remove SS-Board.
8.16. Removal of SS2-Board and
SS3-Board
1. Disconnect the connectors (SS02, SS03, SS32, SS35).
2. Remove the flexible cables from the connectors (SS51,
SS52, SS57, SS58).
3. Remove 10 screws and then remove SS2-Board and
SS3-Board.
8.17. Removal of S1-Board
1. Remove 2 screws (H) and then remove the S1-Board
Block.
2. Disconnect the connector (S34).
3. Remove 1 screw (J) and then remove S1-Board.
8.18. Removal of Front Glass, V1,
V2-Board and Cabinet Assy
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (DS2, DS15).
3. Remove 18 screws.
4. Pull the bottom of the Plasma Display Panel forward
(arrow1).
5. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).