Panasonic TH-65PF11UK - Removal of C1, C2, C3, C4, C5, C6-Board

28
TH-65PF11UK
8.19. Removal of C1, C2, C3, C4, C5,
C6-Board
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board).
2. Remove the Cabinet Block.
(Refer to Removal of Front Glass, V1, V2-Board and Cab-
inet Assy)
3. Disconnect the Fan Relay Connectors.
4. Remove 8 screws and then remove the Fan Blocks (2, 3).
5. Remove 4 screws ( ) and then remove the Speaker Ter-
minal Blocks (L), (R).
6. Remove 4 screws ( ) and then remove the Reinforce-
ment Angles (L), (R).
7. Remove 12 screws ( ) and then remove the Connection
Plates (A, B, D, E).
8. Remove 12 screws ( ) and then remove the Connection
Plates (C, F).
8.19.1. Removal of C1-Board
1. Remove the flexible cables from the connectors (C10,
C11).
2. Remove 10 screws ( ) and then remove the flexible
cables from the connectors (CA1, CA2, CA3, CA4, CA5).
3. Remove 5 screws ( ) and then remove C1-Board.
8.19.2. Removal of C2-Board
1. Remove the flexible cables from the connectors (C20,
C21, C22, C23).
2. Remove 10 screws ( ) and then remove the flexible
cables from the connectors (CA6, CA7, CA8, CA9,
CA10).
3. Remove 5 screws ( ) and then remove C2-Board.
8.19.3. Removal of C3-Board
1. Disconnect the connector (C32).
2. Remove the flexible cable from the connector (C33).
3. Remove 10 screws ( ) and then remove the flexible
cables from the connectors (CA11, CA12, CA13, CA14,
CA15).
4. Remove 5 screws ( ) and then remove C3-Board.