35
TH-80LFB70E
Caution when attaching Slot Fixing Metal and A PCB
Fixing Metal
• Attach on the basis of mounting holes.
6. Remove the screws and then remove the VESA Metal Up
and Hangar Stand Metal (L, R).
7. Remove the screws and remove the Cab Fixing Metal (L,
R) first and then remove the Cab Fixing Metal (T, B).
Caution when attaching Cab Fixing Metal
• After attaching the Cab Fixing Metal (T, B), attach the
Cab Fixing Metal (R, L).
• Please return FFC inside before attaching the Cab Fixing
Metal.
• When attaching the Cab Fixing Metal (L), please take out
the FFC inside from the hole where it is stuck on the felt.
To Next Page
Loading...
