36
TH-80LFB70E
8. Take out the FFC (from V1-Board) and the lead wire (from
Touch Module) attached to the side of the LCD Panel to
the outside of the Cabinet.
9. Remove the LCD Panel.
Attention when removing LCD Panel
(1) Put a glove, and hold the VESA Metal and then
raise LCD Panel aslant by two persons.
(2) With LCD Panel held, two persons need to be
divided into the left and the right and raise
LCD Panel.
(3) Put LCD Panel calmly on the stable level place
covered with soft cloth and sponge.
10. Remove the screws and then remove the P PCB Fixing
Metal (with P-Board and Speaker Block (R)).
To Next Page
Loading...
