45
RAM Module
5 Set the cover and battery pack.
Tighten the screws in the order of 1 to 4.
CAUTION
z Set the cover and battery pack correctly so that they do not fall when you carry the computer.
NOTE
z If it is hard to insert or to press down the RAM module, do not try forcibly but check the module’s direction.
z Use the appropriate screw driver so as not to strip the thread of screw.
z If the RAM module is recognized correctly, the total size of the RAM module memory is displayed on the [Information]
menu of the Setup Utility (Î page 89).
If the RAM module is not recognized, power off the computer and insert it again.
1 234
To Next Page
Loading...
