Panasonic Toughbook CF-31GT2AX2M

69
Modem
The computer automatically resumes from sleep
*2
when the telephone connected to the modem rings.
You will need software to keep the computer in idle state waiting for a phone call, and if you prefer, to turn the computer to
sleep
*2
again afterward. For further information, refer to the instruction manual of the software application.
 To enable this function
1 Click (Start) - [All Programs] - [Windows Fax and Scan].
2 Click [Tools] - [Fax Settings].
 A standard user needs to enter an administrator password.
 Check whether the modem you are using is displayed in Device name. If not, click [Select fax device] and select
the correct modem.
3 Add a check mark for [Allow the device to receive fax calls] and click [OK].
4 Click (Start) - [Computer] - [System properties] - [Device Manager].
 A standard user needs to enter an administrator password.
5 Double-click [Modems], and then double-click the internal modem.
6 Click [Power Management] and add a check mark for [Allow this device to wake the com-
puter], and then click [OK].
1 Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -
[Device Manager] - [Modems], and double-click the internal modem.
2 Click [Power Management], add the check mark for [Allow this device to bring the com-
puter out of standby.], and click [OK].
 To set the time to return the computer to sleep
*2
The computer will enter sleep
*2
after the set time even when the communication is not completed. You can avoid such
uncompleted communication if you select [Never], but the computer does not return to sleep
*2
after resuming by a phone call.
Ring Resume Function