82
Wireless LAN
B Input necessary information and add check marks for [Start this connection automatically] and [Connect even if the
network is not broadcasting] and click [Next].
1 Right-click / / / / on the notification area.
The [Atheros Client Utility] screen appears.
When
, , or is displayed, skip step 2.
2 When you double-clicked in step 1, slide the wireless switch to turn on.
3 Click [Profile Management], and click [New].
4 Enter the profile name and wireless network name (SSID), and make other necessary
changes, then click [OK].
5 Select the profile you set and click [Activate].
6 Click .
NOTE
You need to set the profile for each user.
The settings depend on the network environment. For further information, ask the system administrator or the person
in charge of the network.
For further information of Atheros, click [Help] - [Atheros Client Utility Help] in the menu bar.
Setting the Profiles
To Next Page
Loading...
