108
Technical Information
Close the communications software before using the power saving function.
If the power saving function (sleep
*1
or hibernation) is activated while communications software is used, the network con-
nection may be interrupted, or the performance may be adversely affected. In this case, restart the computer.
In a network environment, set [Never] for [Put the computer to sleep] and [Hibernate after] ( page 14).
In a network environment, set the [System standby] and [System hibernates] settings to [Never].
Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes].
*1
Windows XP: standby
The Windows files included in the Windows DVD-ROM are contained in the following folders:
c:\windows\support\migwiz, c:\windows\support\tools, c:\windows\support\logging
c:\windows\docs, c:\windows\dotnetfx, c:\windows\i386, c:\windows\support, c:\windows\valueadd
The COM ports of the computer are assigned as below.
COM1 : Serial Port A
COM2 : Serial Port B (Port replicator
*2
/Car mounter
*2
)
COM3 : GPS
*2
*2
Optional
If you change the assignment, the serial devices may not work properly.
Network Connections and Communications Software
About Windows-related files
Serial Devices
To Next Page
Loading...
