Panasonic TQBJ0323-1

Preparation
12  ENGLISH
Start-up display
The LANGUAGE and INITIAL SETTINGmenuwillbedisplayedwhentheprojectoristurnedonforthersttimeor
after it has been initialized. (

page 41)
Navigate the DISPLAY OPTION menu to set the menus in accordance to its application and environment settings.
NOTE:
Whentheprojectoristurnedonforthersttime,youmayberequiredtoadjustthe“zoomring”and“focusring”• (

page 13)
on the top of the projector body to make the menu screen clearer.
For details, see POSITION THE IMAGE. (

page 24)
1
To select the desired language.
PLEASE SELECT LANGUAGE.
SELECT
ENTER
INITIAL SETTING
2
ENTER
To proceed to INITIAL SETTING
menu.
1
To select the desired menu.

INSTALLATION

HIGH ALTITUDE MODE
2
To change the settings in the
menu.
RETURN
SELECT
ENTER
INSTALLATION
INITIAL SETTING
FRONT/DESK
HIGH ALTITUDE MODE
SWITCH TO HIGH ALTITUDE MODE “ON” IF OVER 1400m(4593Ft).
OFF
INSTALLATION (

page 17, 39)
FRONT/
DESK
Putitonadeskoroorandproject
from the front
FRONT/
CEILING
Mount it on the ceiling with a ceiling
mount bracket (sold separately) and
project from the front
REAR/
DESK
Putitonadeskoroorandproject
from the rear (a translucent screen is
required)
REAR/
CEILING
Mount it on the ceiling with a ceiling
mount bracket (sold separately) and
project from the rear (a translucent
screen is required)
HIGH ALTITUDE MODE (

page 9, 39)
OFF
Use in normal environment
(below 1 400 m (4 593 ft) above sea
level)
ON Use at high altitude
(at 1 400 - 2 700 m (4 593 - 8 858 ft)
above sea level)
3
ENTER
NOTE:
To return to • LANGUAGE menu, press [RETURN] in
INITIAL SETTING menu.
LANGUAGE
INITIAL SETTING
Preparation