Panasonic UF-890 - Halftone; Verification Stamp

Basic Transmission Settings
43
Basic Operations
The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is
preset to HALFTONE = Off. You can select either Fast or Quality mode.
Press to:
The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
successfully transmitted page with a small mark.
Press to:
NOTE
1. When you select HALFTONE, FAST or QUALITY, your machine will automatically select Fine
Resolution.
2. When you store a document in memory, the Verification Stamp will stamp on the document if it
is successfully stored in memory. In this case the Verification Stamp is not a confirmation that
the document was successfully transmitted. If you wish to disable the use of the Verification
Stamp when storing document in memory, change the setting of Fax Parameter No. 28. (See
page 37)
3. To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04.
(See page 36)
Halftone
Verification Stamp
HALFTONE
HALFTONE
QUALITY
FAST
HALFTONE
QUALITY
FAST
HALFTONE
QUALITY
FAST
HALFTONE = Off HALFTONE = Quality HALFTONE = Fast
STAMP
STAMP = Off STAMP = On
STAMP
STAMP