Panasonic UF-890 - Changing or Erasing the Department Code

Department Code
101
Advanced Features
If you have to change or erase any of the Department Codes, follow the steps below.
Changing or Erasing the Department Code
1
SET MODE (1-6)
ENTER NO. OR
∨ ∧
2
INPUT ACCESS CODE
❚❚❚❚
3
If you set the Access Code to restrict the Parameters
settings, the unit prompts you to Input the Access Code.
Input the Access Code and press .
FAX PARAMETER(01-99)
NO.=
❚
4
77 LOGO/DEPT. CODE
3:DEPT. CODE
5
DEPT. CODE (01-24)
ENTER NO. OR
∨ ∧
6
Enter the Department Code number you wish to change
or erase.
Ex: (01 to 24)
LOGO/DEPT. NAME
12 PANASONIC SALES
7
then enter a new LOGO. (See Note 1 and 2)
Ex:
or just go to step 10 to erase the Department Code.
LOGO/DEPT. NAME
12
❚
LOGO/DEPT. NAME
12 PANAFAX SALES
❚
8
INPUT DEPT. CODE
1234
9
Then enter a new Department Code.
Ex:
INPUT DEPT. CODE
❚❚❚❚
INPUT DEPT. CODE
5678
FUNCTION
7
4
SET
SET
7 7
SET
SET
1 2
CLEAR
P A N A F A X
SPACE
S
A L E S
SET
CLEAR
5 6 7 8
Continued on the next page...