Panasonic UF-890 - Receive To Memory Feature

88
Receive To Memory
This feature is used to secure all received documents by storing them into the memory. To print out the
document from memory, the authorized operator must enter the correct password.
NOTE
1. When the memory overflows, the machine will stop receiving and release the line. The
machine will not answer the next incoming call until there is space available in the memory.
2. We recommend that optional flash memory card is installed when this function is used. See
page 153 on Image Memory Capacity.
General Description
Setting the RCV To Memory Password
1
SET MODE (1-6)
ENTER NO. OR
∨ ∧
2
FAX PARAMETER(01-99)
NO.=
❚
3
37 RCV TO MEMORY
❚❚❚❚
4
Enter a 4-digit RCV to Memory Password.
Ex:
37 RCV TO MEMORY
1234
5
Setting RCV To Memory
1
SELECT MODE (1-5)
ENTER NO. OR
∨ ∧
2
RCV TO MEMORY=OFF
1:OFF 2:ON 3:PRINT
3
RCV TO MEMORY=ON
1:OFF 2:ON 3:PRINT
4
NOV-12-2001 15:00
< RCV TO MEMORY >
FUNCTION
7
4
SET
3 7
SET
1 2 3 4
SET
STOP
FUNCTION
8
5
SET
2
SET