Program Keys
74
Setting for Deferred Polling
To set a Program Key for deferred polling
1
PROGRAM (1-4)
ENTER NO. OR
∨ ∧
2
PROGRAM[P ]
PRESS PROGRAM KEY
3
Ex:
PROGRAM[P1] NAME
ENTER NAME
4
Enter the station name (up to 15 characters) by using the
Character keys. (See page 14)
Ex: PROG.A and
PROGRAM[P1]
PRESS FUNCTION KEY
5
DEFERRED POLLING
START TIME
❚
:
6
Enter the starting time.
Ex: (10:00 p.m.) and
DEFERRED POLLING
PASSWORD=
❚❚❚❚
7
Enter a 4-digit polling password.
Ex: and
The polling password appears if it has been previously
set.
ENTER STATION(S)
THEN PRESS START
8
Enter the station by any combination of the following
methods:
• One-Touch Dialing
• Abbreviated Dialing
• Directory Search Dialing, press after each
station is entered
(For details, see page 47 to 50.)
Ex:
<01>(Station name)
5551234
9
You can now set other Program Keys by repeating the
procedures from Step 3, or return to standby by pressing
.
PROGRAM[P ]
PRESS PROGRAM KEY
FUNCTION
7
3
SET
2
SET
P1
To Next Page
Loading...
