Auto Tuning
14
Auto Tuning
Search and store TV channels automatically.
●
These steps are not necessary if the setup has been completed by your local dealer.
●
Please complete connections (p. 11 - 13) and settings (if necessary) of the connected equipment before starting Auto Tuning.
For details of settings for the connected equipment, read the manual of the equipment.
1
Turn the TV On with the POWER button
or
(TV) (Remote)
2
Select your language
OSD Language
select
set
3
Select your country
Country
Colombia Panama Other
select
access
4
Select the mode to tune
TV Signal Selection
DVB-T
Analogue-Antenna
Start Auto Tuning
Analogue-Cable
select
tune / skip tuning
: tune (search for the available channels)
: skip tuning
5
Select [Start Auto Tuning]
TV Signal Selection
DVB-T
Analogue-Antenna
Start Auto Tuning
Analogue-Cable
select
access
Auto Tuning starts
●
Auto Tuning will start to search for TV channels and store them.
The stored channels and sorted channel order vary depending on the area, broadcasting
system and conditions of signal reception.
CH 2 69
CH 2 69
19
19
19
69
69
69
10
10
10
10
10
service 7
service 8
service 5
DIGITAL !!07.2
DIGITAL !!07.2
service name max20
10
Searching
Auto Tuning - Digital TV and Analogue
Digital TV Scan
Antenna Scan
This will take about 6 minutes.
CH
Channel Name
Type
Digital TV
Digital TV
Digital TV
Digital TV
Analogue TV
Analogue TV
Quality
Digital TV: 11 Antenna: 0
TC-L42E5H_EN.indd 14TC-L42E5H_EN.indd 14 4/30/2012 8:31:27 AM4/30/2012 8:31:27 AM
To Next Page
Loading...
