Watching TVWatching TV
2121
[16:9] [Zoom1]
Directly displays the image at 16:9 without
distortion (anamorphic).
Displays a 16:9 letterbox or 4:3 image
without distortion.
[Just] [Zoom2]
Displays a 4:3 image full-screen.
Stretching is only noticeable at the left and
right edges.
Displays a 16:9 letterbox (anamorphic)
image full-screen without distortion.
[4:3] [Zoom3]
Displays the image at the standard 4:3
without distortion.
Displays a 2.35:1 letterbox (anamorphic)
image full-screen without distortion.
At 16:9, displays the image at its maximum
(with slight enlargement).
[4:3 Full]
Displays a 4:3 image enlarged horizontally
to fit the screen.
●
For Digital TV or HD signal
Note
●
Only [16:9] and [4:3 Full] are available in Digital TV.
●
Only [16:9] and [4:3] are available in PC input mode.
●
Aspect mode can be memorised separately for SD (Standard definition) and HD (High definition) signals except in Digital TV.
Last view
Switch to previously viewed channel or input mode easily
●
Press again to return to the current view.
Note
●
Watching less than 10 seconds is not regarded as the previously viewed channel or input mode.
Change OSD language
You can change language for on-screen displays.
1 Display the menu 2 Select [Setup]
Setup
select
access
3 Select [Language]
Language Access
select
access
4 Select [OSD Language]
OSD Language Access
Language
select
access
5 Select the language and set
OSD Language
select
set
TC-L42E5H_EN.indd 21TC-L42E5H_EN.indd 21 4/30/2012 8:31:36 AM4/30/2012 8:31:36 AM
To Next Page
Loading...
