How to Use Menu Functions
3131
Menu
Item Adjustments / Configurations (alternatives)
Sound
HDMI1 / 2 / 3 / 4 Input
Selects to fit the input signal [Digital] / [Analogue] (p. 73)
[Digital]: When sound is carried via the HDMI cable connection
[Analogue]: When sound is not carried via the HDMI-DVI adaptor cable connection
●
For HDMI input
Reset to Defaults
Press the OK button to reset the current Sound Mode, [Balance] and [Surround] to the
default settings
Network
Connection Test,
Network Connection,
Wireless Network
Settings,
IP/DNS Settings
Sets the network setting to use in your network environment (p. 54 - 56)
Network Link Settings Sets to control the TV with the devices connected to the network (p. 53)
Software Update Checks for available software updates from the Panasonic website
New Software Message
Selects whether to give a notification message when new software is found via network
[Off] / [On]
Network Status Displays the network status (MAC Address, current network settings, etc.)
Timer
Off Timer
Sets the duration of time until the TV automatically goes into Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 20)
Auto Standby
Sets the duration of time that the TV will remain on when no operation is performed
[Off] / [2] / [4] (hours)
●
Automatic input switching with the connected equipment affects this function and time-
count will be reset.
●
The notification message will appear 3 minutes before going into Standby mode.
Setup
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode
●
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save] [On]
[Intelligent Auto Standby] [On (No reminder)]
[Auto Standby] [2 hours]
Child Lock Applies access control for channels or inputs to prevent unwanted access (p. 38)
TC-L42E5H_EN.indd 31TC-L42E5H_EN.indd 31 4/30/2012 8:31:40 AM4/30/2012 8:31:40 AM
To Next Page
Loading...
