Link Functions (VIERA Link)
66
Speaker control [Speaker Selection]
You can control the theatre speaker with this TV remote control pointing at the TV’s signal receiver.
●
If you cannot operate, check the settings and the equipment.
“Summary of features” (p. 61, 62), “Preparations” (p. 63)
1
Display [VIERA TOOLS] and select [VIERA Link]
VIERA Link
select
access
2
Select [Speaker Selection]
VIERA Link Menu
VIERA Link Control
Speaker Selection Home Cinema
Recorder
select
access
3
Set to [Home Cinema] or [TV]
select
store
[Home Cinema]:
The sound is from theatre speakers. Player theatre, Blu-ray Disc theatre or Amplifier will be automatically turned on if it is
in Standby mode.
●
Volume up / down
●
Mute
●
The sound of TV speakers is mute.
●
When the equipment is turned off, TV speakers will be active.
[TV]:
TV speakers are active.
Multi-channel sound
If you want to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via an Amplifier, connect it with HDMI cable and Optical
digital audio cable (p. 62), and then select [Home Cinema]. If your Amplifier has “HDAVI Control 5” function, you only need to
connect it with HDMI cable to the TV’s HDMI2 terminal.
Note
●
These functions may not work properly depending on the connected equipment.
●
Image or sound may not be available for the first few seconds when input mode is switched.
●
“HDAVI Control 5” is the newest standard (as of November, 2011) for HDAVI Control compatible equipment. This standard is
compatible with conventional HDAVI equipment.
●
To confirm this TV’s version of HDAVI Control [System Information] (p. 33)
TC-L42E5H_EN.indd 66TC-L42E5H_EN.indd 66 4/30/2012 8:31:59 AM4/30/2012 8:31:59 AM
To Next Page
Loading...
