EasyManua.ls Logo

Panasonic VL-GM201A - General Information; Technical data about this product

Panasonic VL-GM201A
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
General Information
Technical data about this product
Monitor station
Power supply: 24 V DC
Current consumption: Standby: Approximately 37 mA
At operation: Approximately 420 mA
Dimensions: Approximately height 136 mm x width 136 mm x depth 32 mm
(5
3
/8" x 5
3
/8" x 1
1
/4")
Mass (Weight): Approximately 350 g (0.77 lb.)
Operating environment: 0 °C to 40 °C (32 °F to 104 °F), Up to 90% RH
(Relative Humidity) non condensing
Installation method: Wall mount (Wall mount bracket included)
External material: Flame retardant ABS resin (panel: acrylic resin)
Note:
L To connect to a door opener, make sure the door opener is:
Normal open (Low active)
Less than 30 V AC (1 A), 24 V DC (1 A)
AC adaptor (Part number: PFAP1014)
Power supply: 100 V 240 V AC, 50 Hz / 60 Hz
Output voltage: 24 V DC
Output current 2 A
Dimensions: Approximately height 120 mm x width 60 mm x depth 35 mm
(4
3
/4" x 2
3
/8" x 1
3
/8")
Mass (Weight): Approximately 310 g (0.68 lb.)
Operating environment: 0 °C to 40 °C (32 °F to 104 °F), Up to 90% RH
(Relative Humidity) non condensing
Note:
L Design and specifications are subject to change without notice.
L The pictures and illustrations in these instructions may vary slightly from the actual
product.
GM201A.book Page 30 Monday, April 4, 2005 5:10 PM

Related product manuals