Panasonic VL-MW250BX - Changing the function settings of the main monitor station (Function list)

Programming
36
Changing the function settings of the main monitor station
(Function list)
How to change the function settings
XX
{OFF}
{PAGE}
{MENU}
{VOLUME}
1 Press {MENU}, then select the desired item by
pressing {VOLUME} (
▲
) or {PAGE} (▲).
2 Press {MENU} (OK), then select the desired item
by pressing {VOLUME} (
▲
) or {PAGE} (▲).
3 Press {MENU} (OK), then select the desired
setting by pressing {VOLUME} (
▲
) or
{PAGE} (▲).
LIn some functions, repeat this operation
according to the display instructions.
4 Press {MENU} (OK).
LIf “DELETE ALL PICTURES” is selected (page
37), the confi rmation message is displayed. To
erase all images, press {VOLUME} (YES).
5 To end the setting, press {OFF}.
Note:
LWhen receiving a call while setting or no operation is done for about 90 seconds, the setting function screen
automatically quits.
Function list of the main monitor station
The default setting is indicated in bold.
Item (function) Setting
TIME AND DATE
SETTINGS
LYou can set the current date and time (page 17).
RING TONE SETTINGS
RING VOLUME DOOR STATION: HIGH, MEDIUM, LOW, OFF
PAGE : HIGH, MEDIUM, LOW
LYou can select the ringer volume of the main monitor station (page 33).
RING TONE DOOR STATION 1: SOUND 1, SOUND 1 (REPEAT),
SOUND 2, SOUND 2 (REPEAT),
SOUND 3, SOUND 3 (REPEAT)
DOOR STATION 2: SOUND 1, SOUND 1 (REPEAT),
SOUND 2, SOUND 2 (REPEAT),
SOUND 3, SOUND 3 (REPEAT)
LYou can select the ringer tone of the main monitor station for calls from the
door station (page 34).
SW250BXOI.indb36SW250BXOI.indb36 2010/08/2515:58:362010/08/2515:58:36