Panasonic VL-MW250BX - Canceling registration of the sub monitor station;repeater (CANCELLATION)

46
Expanding the System
Canceling registration of the sub monitor station/repeater
(CANCELLATION)
You can cancel the registration of a sub monitor station or a repeater if you do not use it.
Using the main monitor station
1 Press {MENU}, then select “REGISTRATION/
CANCELLATION” by pressing {VOLUME} (
▲
) or
{PAGE} (▲).
FUNCTION SETTINGS
TIME AND DATE SETTINGS
RING TONE SETTINGS
CONNECTED DEVICE SETTINGS
REGISTRATION/CANCELLATION
2 Press {MENU} (OK), then select “CANCELLATION”
by pressing {VOLUME} (
▲
) or {PAGE} (▲).
REGISTRATION/CANCELLATION
REGISTRATION
CANCELLATION
3 Press {MENU} (OK), then select the device to be
canceled by pressing {VOLUME} (
▲
) or
{PAGE} (▲).
CANCELLATION
CANCEL SUB MONITOR STATION
CANCEL REPEATER
4 Press {MENU} (OK), then select the device
number to be canceled by pressing
{VOLUME} (
▲
) or {PAGE} (▲).
(Example: Sub monitor station 2)
CANCEL SUB MONITOR STATION
SUB MONITOR STATION 1
SUB MONITOR STATION 2
SUB MONITOR STATION 3
5 Press {MENU} (OK).
6 To end the operation, press {OFF}.
XX
{OFF}
{PAGE}
{MENU}
{VOLUME}
Important:
LRemove the battery from the canceled sub monitor station in order to avoid malfunction.
LTurn off the power of the canceled repeater in order to avoid malfunction.
SW250BXOI.indb46SW250BXOI.indb46 2010/08/2515:58:382010/08/2515:58:38