R To talk to the visitor if the paged party does not
answer:
: Touch [Talk to visitor].
: Press .
4.3 Monitoring the outside with
the doorphone
You can monitor the sounds and images from the
doorphone.
1
: From the top menu, touch .
R When there are multiple devices displayed, touch
the number of the doorphone that you want to
monitor with (A) and then the image (B).
Example: When there are both doorphones and
cameras.
: Press .
R When there are multiple devices displayed:
: Select the destination. ® ( )
2 The images from the doorphone are displayed.
R Press
to speak to the monitored party.
3 To end the operation, press .
Features available while monitoring
– Adjust wide/zoom and pan/tilt settings (®
page 33)
– Adjust sound and display settings (® page 33)
– Record monitored images (® page 20)
Note:
R The sound from your end will not be heard at the
doorphone.
R Monitoring time:
: About 90 seconds (can be extended up to 3
minutes by performing operations during monitoring)
: About 3 minutes
4.4 Talking between the main
monitor and the sub monitor
Intercom calls between the main monitor and the sub
monitor can be made.
– When using multiple sub monitors, you can make
intercom calls between the sub monitors.
To make calls
1.
: From the top menu, touch .
R When there are multiple devices that can be
selected, select the device. To call all devices,
touch [Call all together].
: Press .
R When there are multiple devices that can be
selected:
: Select the device.
*1
® ( )
*1
To call all devices, select "Call all together".
2. Page the other party.
3. Talk with the paged party when they answer the call.
4. To end the operation, press .
To receive calls
– This operation is the same for the main monitor and
sub monitor.
1. When the intercom call is received, press
to talk to the paging party.
Note:
R Paging automatically ends after about 30 seconds
and intercom calls automatically end after about 90
seconds.
18
4. Talking/Monitoring
To Next Page
Loading...
