7.1 Connecting with electric locks
When a commercially available electric lock is connected
to the main monitor, you can open a door or gate using
the main monitor or the sub monitor. You can also select
how long the door or gate remains open.
To use electric locks, they must be configured on the
main monitor.
R A maximum of 4 electric locks can be connected to
the main monitor.
R For detailed information about connections, see the
manual included with the electric lock and the
Installation Guide of this product.
7.1.1 Configuring electric locks
– This operation can only be performed on the main
monitor.
1 From the top menu, touch ® ®
[Connected devices] ® [Electric lock] ® the
doorphone to be configured.
R [Unlocking buzzer sound] can also be configured.
(® page 37)
2 Touch the electric lock to be configured and then
touch the unlocking time.
3 To end the operation, press
.
7.1.2 Unlocking electric locks
1 When talking or monitoring with the doorphone:
: Touch or .
: ( )
R When there are 2 electric locks connected to the
same doorphone:
: Select the electric lock to be unlocked. ®
( )
Opening another door or gate:
R After opening the door or gate, you can open
another door or gate by touching
or
(sub monitor: ).
Note:
R You can only open the door or gate when talking or
monitoring.
R When using multiple electric locks with different
doorphones:
You can only open the electric locks from the
doorphone that they are linked to.
29
7. . Using electric locks
7. Using electric locks
To Next Page
Loading...
