Function name Setting contents and other information
Warning sound Sound type: <Sound a>, Sound b, Sound c
Volume: <Loud>, Normal, Quiet
R By operating the main monitor or sub monitor when monitoring or performing other
actions, you can make a warning sound come out of the camera. Select the type
and volume of the sound.
Owner’s voice volume Loud, <Normal>, Quiet
R Select the volume of the sound from the camera when talking or calling out to
visitors.
Camera mic sensitivity <High>, Normal, Low
R When too much sound is picked up, select [Normal] or [Low].
Item name: Other settings
Function name Setting contents and other information
Indicator lamp <Always>, When transmitting, Off
R Select how the indicator lamp lights up.
– When [When transmitting] is selected, the lamp only lights up when the main
monitor or sub monitor are talking or monitoring with the camera.
Camera detection
history
R Displays the sensor detection history. (Displays the latest 24 entries.)
Initialize settings Yes, No
R Returns the camera’s settings to the factory default.
– The camera remains registered to the main monitor even if the camera’s settings
are initialized. (Registration information is not deleted.)
28
6. Using a camera
To Next Page
Loading...
