How to change settings
1. In the information screen, press ( ).
2. : Select the function name. ® ( )
3. : Select the setting contents. ® ( )
R To adjust "Contrast", use and then press ( ).
R To execute "Initialize", press (Yes). (Initialization is completed when the screen turns off.)
4. To end the operation, press .
Note:
R The setting function screen automatically quits if an incoming call is received or if no operations are performed for
about 60 seconds.
R In the following table, < > indicates the default settings.
Sub-menu
Settings
1 2
Ringtone Doorphone 1 <Sound 1>, Sound 2, Sound 3, Sound 4 <Normal>, Repeat
Doorphone 2 Sound 1, <Sound 2>, Sound 3, Sound 4 <Normal>, Repeat
Camera 1 - 4 <Sound A>, Sound B, Sound C, Sound D
Key sound – <On>, Off
Contrast – The contrast can be adjusted to 5 different levels (default setting:
level 3). When it is difficult to see the monitor display, adjust the
contrast as necessary.
Register – Yes, No
R Used when registering sub monitors to the main monitor.
– The supplied sub monitor is pre-registered to the main
monitor.
– See page 39 for information about re-registering cancelled
sub monitors.
Initialize – Yes, No
R The sub monitor remains registered to the main monitor even if
its settings are initialized. (The registration information is not
deleted.)
38
9. Additional functions
To Next Page
Loading...
