Panasonic WH-SXC09F9E8

20
User
Shifting the water temperature
Desired temperature setting
This easil
y
shifts the water outlet temperature if the settin
g
is
undesirable.
1
sserP
to enter the water temperature shifting mode.
2
sserP
to change setting.
3
sserP
or to set the desired temperature.
(temperature range: -5 °C ~ 5 °C)
Temperature setting
+5
-5
Shift value
<Water outlet
t
emperature>
<Outdoor ambient temperature>
4
sserP
to confirm the setting.
■
Note:
• Pres
s
or wait for 30 seconds to exit the SETTING mode.
• The set temperature will be saved in the s
y
stem once confirmed.
• The SETTING mode cannot be activated when the SERVICE and STATUS indicators are ON.
• The s
y
stem will shift the temperature within water outlet temperature ran
g
e.
User
Holiday mode
• B
y
settin
g
the da
y
(
s
)
in holida
y
mode, it promotes ener
gy
savin
g
while you are on holiday, and enables the system to resume at the
preset temperature after your holiday.
• Ensure that the s
y
stem is OFF before settin
g
.
• The s
y
stem will resume operation automaticall
y
at 00:00 am after
the holiday.
• The da
y
the HOLIDAY mode was set is counted as da
y
1.
Desired days
Example:
Settin
g
the holida
y
mode on June 21, 08:00 am. B
y
settin
g
3 da
y
s,
t
he s
y
stem resumes operation on June 24, 00:00 am.
1
sserP
to enter the HOLIDAY mode.
2
sserP
or to set the desired days.
(Setting range: 1 day ~ 999 days)
3
sserP
to confirm the setting.
■
Note:
• Pres
s
or wait 30 seconds to exit the HOLIDAY mode.