G
Gregory SheltonSep 13, 2025
Why is the Panasonic WH-SXC12H9E8 operation delayed after restarting?
- RRichard ScottSep 13, 2025
The delay is a protection mechanism for the compressor.
To Next PageTo Next PageWhy is the Panasonic WH-SXC12H9E8 operation delayed after restarting?
The delay is a protection mechanism for the compressor.
General| Heating Capacity | 12.00 kW |
|---|---|
| Energy Class Heating | A++ |
| Refrigerant | R32 |
| Weight (Indoor Unit) | 45 kg |
| Series | Aquarea |
| Cooling Capacity | 10 kW |
| Energy Efficiency Ratio (Heating) | 4.67 |
| Noise Level (Indoor Unit) | 30 dB(A) |
| Noise Level (Outdoor Unit) | 56 dB(A) |
| Operating Temperature Range (Heating) | -20°C to +35°C |
| Operating Temperature Range (Cooling) | -10°C to +43°C |
| Type | Air-to-Water Heat Pump |
Configuration options for system parameters, connectivity, and operational modes.
Settings for pump, concrete drying, service contacts, and problem diagnosis.
Explanation of warning symbols and their significance for injury and damage.
Safety guidelines for operating, cleaning, and maintaining the indoor and outdoor units.
Safety measures for power cords, outlets, and circuit breakers to prevent hazards.
Advice on what to do in case of system abnormalities like noise, leaks, or breaker trips.
Cautions regarding cleaning, installation location, and touching unit parts.
Safety instructions for operating and maintaining the remote controller to avoid damage or injury.
Identification and explanation of buttons and indicator lights on the remote controller.
Configuring optional PCB features and selecting system zones and sensors.
Setting the heater power capacity and activating freeze prevention measures.
Configuring alternative sensors and setting up bivalent connections for backup heating.
Setting water temperatures for system ON and OFF conditions during heating.
Configuring heating temperature curves or direct input points for precise control.
Setting water temperatures for system ON and OFF conditions during cooling.
Configuring cooling temperature curves or direct input points for precise control.
Linking observed symptoms to potential causes of system operation issues.
Detailed explanations for various error codes displayed by the system.
