14
!7 Power cord inlet (AC IN)
Connect the provided power cord to this inlet.
!8 Video in connectors (BNC) (VIDEO IN 1 - 16)/
Video out connectors (BNC) (VIDEO OUT 1 - 16)
Images (video signals) from the cameras connected to
the VIDEO IN connectors will be looped through to the
VIDEO OUT connectors.
Connect system cameras or combination cameras to
the VIDEO IN connectors. The VIDEO IN 1 - 4 connec-
tors are compatible with coaxial cable. When connect-
ing a combination camera, connect it either to the
VIDEO IN 1 - 4 connectors.
To Next Page
Loading...
