16
Startup
Start up the recorder as follows.
z
Connect the power cord to a 120 V AC 60 Hz outlet when the model in use is the NTSC model.
When the model in use is the PAL model, connect the power cord to a 220 - 240 V AC 50 Hz outlet.
x
Press the power button to turn on the power of the recorder.
• The OPERATE indicator will light and the system check will start. In the process of the system check, the startup win-
dow will be displayed on a monitor.
• When the system check is completed, live images from the connected cameras will be displayed.
To Next Page
Loading...
