Panasonic WJ-RT416 - Log in

32
Log in
Screenshot 1
When logged out once and press any of the buttons on the
front panel, the password entry window will be displayed.
Step 1
Enter the user password and press the [SET] button.
→ When logged in, the indicator on the arrows button will
light. When failed to log in, the error message window
will be displayed.
Note:
The default password is different according to the user
level as follows.
Manager1: 12345678
Operator1: 123456
Viewer1: 1234
Operation restriction differences between the user levels
*1 The settings can be edited on the setup menu ("User Management" – "User Level Setup"). (☞ page 66)
When being logged out, the user level of "Viewer" will be applied.
*2 Depending on the user level, the available operations of the setup menu varies as follows.
Operator: Logout, alarm log reference, error log reference, system information reference, current recording setting dis-
play
Viewer: Logout only
Input Password
Logout
*1
–
999
–
999
–
999
––
99
––
99
–*1*1
9
–*2*2
9
*1 *1
9
Live image display
Camera channel selection/
Multi-screen selection
Camera channel selection using the
cursor
Sequential display control
Mute control
Manual recording control
Alarm reset
Playback recorded images/Playback
control (Search/Copying)
Setup menu
Viewer Operator Manager