Panasonic WRKT4504E Series - 2 Technical Data

Switching/Blind Actuator
6
2 Technical Data
KNX Medium
TP1
Mode of commissioning
S-Mode
KNX supply
21-32 V DC
Mains supply
110 / 230 V AC
Mains frequency
50 / 60 Hz
Installation type
DIN rail
Mounting width
12/6 Channels  144mm (8 modules)
8/4 Channels  144mm (8 modules)
4/2 Channels 72mm (4 modules)
Ambient temperature
-
Storage temperature
- C
Transportation temperature
-
Connection
KNX
KNX bus terminal
Mains and outputs
Screw terminals
Max. cable cross section
Single wire: 1.5 mm2 to 4mm2 or

Stranded wire without ferrule: 
Stranded wire with ferrule: 0.5mm2 to 2.5mm2
Output contact type
NO , potential-free μ-contact, monostable
Switching Voltage AC
0-230 V AC 10%, 50/60Hz
Switching capacity at 230V AC
16A cos = 1
3A cos = 0.6
Current load rating per device
4/2 Channels

8/4 Channels

12/6 Channels

Overall load current rating of
neighbouring outputs
Max 20A