22
Step 4
Moving the cursor to “SETUP-SW LOCK” and selecting “ON” allow users to disable the back focus adjustment with the operation
buttons (default: OFF).
Important:
• The following are recommendation for back focus setting in accordance with subjects.
For such case (subject conditions) Select this (recommendation)
Back focus adjustment “C/L
← →
B/W” switching
• Normal subject “ABF” “AUTO”
• Frequently moving subj. Fine adjustment with “MANUAL-ADJ”
after “ABF” or “MANUAL-ADJ”
“PRESET” or “FIX”
• Subj. with remarkable illuminance
change
• Subj. with low illuminance
• Too bright or reflective subj.
• Subj. through a window
• Place where the lens easily becomes
dirty
• Subj. with less contrast such as
white wall
• Subj. with remarkable depth
• Subj. with heavy flicker
• Subj. with horizontally parallel lines
such as a shutter
• We shall not responsible for any inconvenience, loss, or damage caused by the settings or results of the back focus function.
To Next Page
Loading...
