Panasonic WV-SC384 - Page 31

Symptom Cause/solution
Reference
pages
Live indicator keeps on
blinking orange approx. in 2
seconds intervals.
•UPnP
TM
error has occurred since the power is not supplied to the
router.
Turn on the power of the router. Wait until the connections are
established.
−
•AnerrorhasoccurredduringtheportupdatebytheUPnPfunc-
tion.
•IftherouterinusedoesnotsupporttheUPnPfunction,perform
the port forwarding setting for the router. In addition, deactivate the
setting of auto port forwarding for the camera.
Operating
Instructions
(PDF)
•UPnPfunctionoftherouterisdisabled.
Refer to the operating instructions of the router to enable the
UPnP function.
−
Live indicator never lights up.
•Is"Off"selectedfor"Link/AccessLED"onthe"Basic"page?
Select "On" or "On(Access)" for the indicator setting.
Operating
Instructions
(PDF)
Live indicator keeps on
blinking red.
•Thecameramaybeoutoforder.
Contact your dealer.
•RefertothereadmefileontheprovidedCD-ROMforfurtherinfor-
mation after checking the displayed contents of the "Maintenance"
page - the [Status] tab - "Self check" of the setup menu.
Or refer to our website (http://panasonic.net/pss/security/support/
info.html) for further information about the supported software.
−
Live indicator lights red.
•Isn’tthewriteprotectswitchoftheinsertedSDHC/SDmemory
card set to "LOCK"?
Unlock the write protect switch of the SDHC/SD memory card.
•Hasn'ttheinsertedSDHC/SDmemorycardbeenformattedona
PC?
Use an SDHC/SD memory card formatted on the camera.
Or install the software to format the SDHC/SD memory card on
the PC. Refer to our website (http://panasonic.net/pss/security/
support/info.html) for further information about the supported soft-
ware.
•Isn'ttheinsertedSDHC/SDmemorycardfaulty?
Replace the card with a normal one.
Operating
Instructions
(PDF)
31