18.2 Configure the HTTPS settings
Click the [Network] tab on the “Network” page. (®page 46, page 48)
The settings relating to the HTTPS protocol that can enhance the network security by encrypting the access
to cameras on this page.
The HTTPS settings will be configured in the following procedure.
Generation of the CRT key (SSL encryption key)
Con figuration of the connection protocol
Access to the cameras using the HTTPS protocol
Application for the approval by CA
(Certi ficate Authority) - Issue of the server certifi cate
Generation of CSR (Certi ficate Signing Request)
Installation of the server certi ficate
Generation of the self-signed certi ficate
When using the server certi ficateWhen using the self-signed certifi cate
Generation of the CRT key (SSL encryption key) (®page 157)
Generation of the self-signed certificate (®page 158)
Generation of CSR (Certificate Signing Request) (®page 160)
Installation of the server certificate (®page 161)
Configuration of the connection protocol (®page 162)
156 Operating Instructions
18 Configuring the network settings [Network]
To Next Page
Loading...
