10.5.5 Configuration of alteration detection
1. Select “On” for “Alteration detection information addition”, and click the [Set] button.
2. Extensive information for alteration detection will be added to video files (MP4 format) recorded after
changing the setting.
IMPORTANT
• When the “Alteration detection information addition” setting is changed, manual recording on the SD
memory card will stop. Start manual saving again as necessary.
Note
• Alteration detection can be performed on video files (MP4 format) recorded when “On” is selected for
“Alteration detection information addition” using exclusive software.
For further information about exclusive software and how to use it, refer to our website below.
http://security.panasonic.com/pss/security/support/info.html
Operating Instructions 69
10 Configure the basic settings of the camera [Basic]
To Next Page
Loading...
