Panasonic WV-SPN531

19
About the indicator
The indicator will light or blink as follows depending on the camera status.
Indicator type and operation state Change of indicator indication
qACT indicator
When data is being sent via the network camera Blinks green (accessing)
wLINK indicator
When the camera is able to communicate with the con-
nected device
Lights orange
eSD MOUNT indicator
•WhenanSDmemorycardisinsertedandcouldbe
recognized
Lights off → Blinks green →
Lights off
•WhendatacanbesavedaftertheSDmemorycardis
inserted and the SD ON/OFF button is pressed
Lights off → Lights green
•
When data can be saved to the SD memory card Lights green
•WhentheSDmemorycardisremovedafterholding
down the SD ON/OFF button for about 2 seconds
Lights green → Blinks green →
Lights off
•WhendatacannotbesavedtotheSDmemorycard
because an abnormality was detected or the SD
memory card is configured not to be used
Lights off
rSD ERROR/ABF indicator
•WhenABF(AutoBackFocus)operationisbeingexe-
cuted
Blinks red (Interval of 1 time/ second)
•Whenthesetisbeingstarted Lights red
•WhenanSDmemorycardisrecognizednormally
Lights red → Lights off
•WhentheSDmemorycardslotisnotusedoranabnor-
mality is detected in SD memory card after the camera
has started
Lights red
③
<Side slide cover interior>
④
①
②
<Rear view>