Panasonic WV-SW175

Mount the flexible stand firmly to the ceiling or wall with screw B
(accessory).
When mounting the flexible stand to the wall, position the flexible stand so
that the “p” marker is facing upward.
Screw B
(accessory)
¢Ceiling
At least 165 mm
p
p
Screw B (accessory)
Keep a distance of 165 mm
{6-1/2 inches} or more from a ceiling
Otherwise the camera cannot
be mounted properly.
¢Wall
Attach the camera by screwing the threaded mount into the stand
mounting hole.
¢Wall¢Ceiling
Grip
Threaded mount
Stand mounting
hole
Threaded mount
Live indicator
Stand mounting
hole
Grip
3
4
Adjust the camera position and tighten the flexible stand grip
and the tightening screw firmly.
The fixing position of the tightening screw can be adjusted according to the
direction the camera is facing and its angle.
¢Ceiling ¢Wall
Grip
Live indicator
Tightening
screw
Top
Top
Bottom
Bottom
Conduit
(locally procured)
Grip
Live indicator
Tightening screw
Conduit
(locally procured)
IMPORTANT
Make sure to fix the conduit not to stress the camera and the flexible stand.
⿟
Adjust the length of the safety wire when it is taut, and secure it
to the ceiling or wall using screw B (accessory) and washer L
(accessory).
Attach the safety wire in a position so that if the camera were to become
detached, it would not fall on nearby people.
¢Ceiling
Screw B
Live indicator
Conduit
(locally procured)
Washer L
(accessory)
Top
Bottom
Top
Bottom
¢Wall
Screw B
Live indicator
Conduit
(locally procured)
Washer L (accessory)
5
6