The settings related to picture in picture can be configured on this page.
[Picture in picture mode]
Select a picture in picture mode from the following settings.
Off: Images are not combined.
Live: Always combines images according to “Picture in picture setting”.
Alarm action 1: Images are combined according to “Picture in picture setting” only when an alarm occurs.
Alarm action 2: In normal operations images are combined according to “Picture in picture setting”. When an
alarm occurs, the main image and sub image are switched.
Alarm action 3: In normal operations images are combined according to “Picture in picture setting”. When an
alarm occurs, the frame rate is changed.
– When “Main: 15fps/ Sub: 15fps” is selected in “Frame rate”, the frame rate changes to “Main: 30fps/ Sub:
1fps”.
– When “Main: 30fps/ Sub: 1fps” is selected in “Frame rate”, the frame rate changes to “Main: 15fps/ Sub:
15fps”.
Alarm action 4: Images are not combined under normal operations. When an alarm occurs, a still image of
the entire screen is combined.
• Default: Off
134 Operating Instructions
15 Configure the settings related to advanced view [Advanced view]
To Next Page
Loading...
