• Access permission: Users whose access level is set to 2 and 3 on the [User auth.] tab
(®page 138) can access the camera only in the period of schedule.
• H.264 recording
: The SD recording will be performed at the
designated time in the schedule.
Note
• Select “On” for “User auth.” on the [User auth.] tab of “User mng.” page (®page 138) and “Off” for
“Host auth.” on the “Host auth.” page (®page 139) to validate “Access permission”.
• When selecting “H.264 recording”, select “H.264(1)” or “H.264(2)” for “Recording format” on the
[SD memory card] tab and select “Schedule” for “Save trigger”. (®page 56)
2. Select days of a week by checking the respective checkboxes.
3. From the pull-down menu, select the start time and the end time of the schedule.
When not designating time, check the checkbox of “24h”.
4. Click the [Set] button after completing the settings.
→ The result will be displayed at the bottom of the window.
Note
• The schedules displayed at the bottom of the window can be identified by colors assigned to each
schedule.
186 Operating Instructions
19 Configure the settings relating to the schedules [Schedule]
To Next Page
Loading...
