12
Major operating controls and their functions
w Terminal block
ヤワヵ
⿀
ヤヰヮ
ロモワユ
チ
モ ロモワユ
チ
ャ
ヤワヵ
ュユヷリヤユ
モロユンヵ ンヴノビピビヤ
ヷリュユヰチヰヶヵ
ヒパャモヴユノヵ
ヒパパャモヴユノヵヹ
ヤワヵ
ビ
ヤワヵ
ヒ
ヤワヵ
⿂
ヤワヵ
⿃
ヤヰヮヤヰヮ ヤヰヮ
ヵㄙュ ンㄙュ
ヴヨ
Power input terminal [AC IN]
Connect the accessory power cord to this terminal. After
connecting it, secure the cord using the power cord
clamp. (Refer to p.24 “Securing the power cord”.)
Confirmation window [CHECK]
This window is used for confirmation purposes when this
unit is installed.
Lane A mic input [OUT MIC]
This is connected to the microphone for the order post
installed in lane A.
Lane A speaker output
[OUT SP (8 ȍ) Class2 Wiring]
This is connected to the speaker for the order post
installed in lane A.
Lane A line output [LINE OUT]
The same communication that is output from OUT SP of
lane A is output.
Lane A kitchen mic input [AUX MIC]
This is connected to the gooseneck microphone installed
in the lane A kitchen.
It is used to speak with the customer who has arrived at
the order post for lane A.
Lane A kitchen speaker output
[AUX SP (8 ȍ) Class2 Wiring]
This is connected to the speaker installed in the lane A
kitchen.
It is used to speak with the customer who has arrived at
the order post for lane A.
Lane A line input [LINE IN]
External communications can be broadcast
simultaneously to all the All-In-One Headsets or Belt
Packs and to the lane A kitchen speaker.
Lane A vehicle detector input [VDET]
This is connected to the vehicle detector installed in
lane A.
Lane B mic input [OUT MIC]
This is connected to the microphone for the order post
installed in lane B.
Lane B speaker output
[OUT SP (8 ȍ) Class2 Wiring]
This is connected to the speaker for the order post
installed in lane B.
Lane B line output [LINE OUT]
The same communication that is output from OUT SP of
lane B is output.
Lane B kitchen mic input [AUX MIC]
This is connected to the gooseneck microphone installed
in the lane B kitchen.
It is used to speak with the customer who has arrived at
the order post for lane B.
Lane B kitchen speaker output
[AUX SP (8 ȍ) Class2 Wiring]
This is connected to the speaker installed in the lane B
kitchen.
It is used to speak with the customer who has arrived at
the order post for lane B.
Lane B line input [LINE IN]
External communications can be broadcast
simultaneously to all the All-In-One Headsets or Belt
Packs and to the lane B kitchen speaker.
Lane B vehicle detector input [VDET]
This is connected to the vehicle detector installed in
lane B.
To Next Page
Loading...
